PTFE Bellows – Glass To Metal
These bellows are used in installation of glass equipment for following purposes :
- to minimize the transfer of vibrations from the rotating equipments which are connected to the glass assembly.
- to accommodate the thermal expansion of any metallic (non-glass) equipment which a r e connected to the glasspipeline.
These are similar to the bellows for glass-to-glass in construction, but having adaptor bellow flange at one end. Generally this adaptor flange is supplied undrilled so that it can be drilled as per the configuration of mating flange. However, this adaptor bellow flange can be supplied drilled AS per "Table E", "Table F" or "ASA 150" standards, if Specified.
Line bellows
| CAT.REF. UNDRILLED | CAT.REF. TABLE E | CAT.REF. TABLE F | CAT.REF. ASA 150 | DN | D | L |
|---|---|---|---|---|---|---|
| FBF0.5 | FBF0.5/E | FBF0.5/F | FBF0.5/A | 12 | 80 | 50 |
| FBF0.7 | FBF0.7/E | FBF0.7/F | FBF0.7/A | 15 | 85 | 55 |
| FBF1* | FBF1/E | FBF1/F | FBF1/A | 25 | 115 | 60 |
| FBF1.5* | FBF1.5/E | FBF1.5/F | FBF1.5/A | 40 | 150 | 65 |
| FBF2* | FBF2/E | FBF2/F | FBF2/A | 50 | 165 | 65 |
| FBF3* | FBF3/E | FBF3/F | FBF3/A | 80 | 200 | 65 |
| FBF4* | FBF4/E | FBF4/F | FBF4/A | 100 | 220 | 65 |
| FBF6* | FBF6/E | FBF6/F | FBF6/A | 150 | 285 | 65 |
| FBF9* | FBF9/E | FBF9/F | FBF9/A | 225 | 395 | 65 |
| FBF12 | FBF12/E | FBF12/F | FBF12/A | 300 | 445 | 65 |
Vacuum Bellows
| CAT.REF. UNDRILLED | CAT.REF. TABLE E | CAT.REF. TABLE F | CAT.REF. ASA 150 | DN | D | L |
|---|---|---|---|---|---|---|
| VBF3 | VBF3/E | VBF3/F | VBF3/A | 80 | 200 | 70 |
| VBF4 | VBF4/E | VBF4/F | VBF4/A | 100 | 220 | 70 |
| VBF6 | VBF6/E | VBF6/F | VBF6/A | 150 | 285 | 70 |
| VBF9 | VBF9/E | VBF9/F | VBF9/A | 225 | 395 | 70 |
| VBF12 | VBF12/E | VBF12/F | VBF12/A | 300 | 445 | 70 |
Note : * marked items are available fast.
